Product Description

DESCRIPTION: STB is inflammable, one component adhesive based on Polychloroprene. It is specially developed for hot climate to use on porous & non-porous substrates. It has a long open time, good wet tack, excellent bonding strength & resistance to heat, water, humidity & detergents. MAIN USES: 1. For installing indoor/outdoor carpeting due to its excellent water resistance. 2. For bonding leather, rubber, shoe material, wood & Formica. 3. Bonding of decorative laminates made of Wood, Steel, Plastics etc. 4. To adhere tapered Polyurethane insulation to each other & with roof substrate. 5. To adhere filler board protection to water proofing membrane. 6. Bonding synthetic rubber floor tiles (Stud tiles). 7. Bonding wide range of PVC wall skirting & PVC profiles. TECHNICAL DATA : Base Material : Synthetic Resin + Polychloroprene Colour : Yellowish Viscosity : ***0 ***0 CPS Density : 0.*5 - 0.*0 gm/cm3 Solid contents : *5 - *8 % Coverage : 4 6 m2/Kg Drying Time : *0 Min.s Shelf Life : *8 months in tightly closed container. DIRECTIONS FOR USE: 1.Surface to be bonded must be from grease & dust. Leather & rubber should be thoroughly roughened. Stir well before use. 2. Apply adhesive evenly to both surfaces using brush. 3. Bonding must take place within the open time (**5 min.s) by pressing material against substrate (****0 min.s). In shoe industry parts must be pressed for at least *0 Seconds. Packaging Sizes: *0 ml Tubes **0 ml Cans **0 ml Cans 3.8 litter Gallons *8 litter Pails **0 litter Drums